Four-body cislunar quasi-periodic orbits and their application to ballistic lunar transfer design

Examining the properties of quasi-periodic orbits provides insight into the Sun-perturbed environment in cislunar space. In this investigation, quasi-periodic trajectories and their properties are explored in the Sun-Earth-Moon four-body problem. Computation and the stability characteristics of families of invariant tori are detailed. Furthermore, this investigation offers a framework for construction of ballistic lunar transfer trajectories in the four-body problem. The framework leverages manifold trajectories to supply a set of initial conditions for construction of periapsis Poincaré maps. Periapsis maps reduce the dimensionality of the space and illuminate solutions of interest as a basis to produce feasible families of transfers. Through a continuation process, families of ballistic transfers and families of transfers that include powered lunar flybys are constructed. Ultimately, these solutions supply an initial guess for transition to the Sun-Earth-Moon ephemeris model.     

轴压载荷下薄壁整体壁板强度设计

在最佳设计面积比的情况下,整体壁板的设计可以得到较高的结构承载能力,但是对于整体壁板,蒙皮与筋条分离面的确定给实际设计工作造成很大障碍。本文针对这一问题开展了相关的研究工作,对蒙皮厚度在2.5mm～3.5mm范围内的“T”形整体壁板,在截面面积相同的条件下给定分离面位置,以最大失稳载荷为设计目标,得到蒙皮与筋条的最佳设计面积比。以此面积比设计的厚蒙皮“T”形整体壁板其承受轴压载荷的能力最强。     

Autonomous mission reconstruction during the ascending flight of launch vehicles under typical propulsion system failures

In recent years, Chinese Long March(LM) launchers have experienced several launch failures, most of which occurred in their propulsion systems, and this paper studies Autonomous Mission Reconstruction(AMRC) technology to alleviate losses due to these failures. The status of the techniques related to AMRC, including trajectory and mission planning, guidance methods,and fault tolerant technologies, are reviewed, and their features are compared, which reflect the challenges faced by AMRC technology...     

低前挡板型小尺寸刷式封严泄漏特性的试验

对间隙、过渡、过盈3种配合状态的低前挡板型小尺寸刷式封严的转子轴心轨迹和泄漏特性进行了实验研究.转子的轴心位移采用电涡流传感器进行测量，其测量结果表明:压差小于0.4MPa时，转子轴心位移随压差的增大略有减小；当压差达到0.4MPa后，其轴心位移范围不再随压差而变化；在不考虑磨损的情况下轴心位移对不同配合状态的封严泄漏特性基本没有影响.由此确保了封严试验台的安全性和有效性.在此基础上，试验研究了转子转速、上下游压差以及封严间隙对泄漏特性的影响.结果表明:泄漏系数随转速增加略有减小；间隙配合下有明显的滞后，过盈配合下滞后不明显；磨损对泄漏的影响在过盈配合下比较显著；间隙配合下压差在0.1～0.2MPa泄漏系数随压差的升高而增大，压差为0.3MPa时泄漏系数降低，0.3MPa以后泄漏系数变化趋于稳定；过盈配合下泄漏系数随压差的升高总体呈增大趋势，压差在0.3～0.5MPa时增大的趋势较小，泄漏系数较为稳定.